Patch Panels
E1, 120 Ohms, 16 Port

VCL Products > Patch Pannels > E1, 120 Ohms, 16 Port High Impedance
E1, 120 Ohms, Monitoring Patch Panel
E1, 120 Ohms, Monitoring Patch Panel
E1, 120 Ohms, Monitoring Patch Panel
E1, 120 Ohms, Monitoring Patch Panel

E1, 120 Ohms, 16 Port High Impedance (Hi-Z)
Monitoring Patch Panel (120 Ohms - Version)

Get Data Sheet

The E1 16 Port Monitoring Patch Panel is primarily designed for applications where E1 circuits are required to be “tapped” for non-intrusive monitoring applications. The E1 Monitoring Patch Panel is simultaneously provides up to 16 high-impedance (Hi-Z) outputs on it's monitoring (MON) port(s) from which, both the transmit (Tx) and the receive (Rx) signals of the patched E1 link can be “tapped non-intrusively” (i.e without disturbing or loading the active E1 link(s) in any manner, and connected to E1 Groomers, Probes or Analysers.

Features

  • Cost effective solution.
  • 19 inch rack mount.
  • High quality and cost effective.
  • Small and compact.

The patch-panel may be accessed remotely over a TCP/IP link using Telnet. This allows the user to create / patch new circuits remotely and make new E1 cross-connections on the fly. SNMP V2 access is also available over UDP link, which allows the user to monitor the patch-panel and all E1 circuits remotely for any alarms. An MIB file is provided with the patch-panel to allow easy integration with customer’s network management systems (NMS), or for easy integration with standard SNMP browsers.

Mechanical Specifications

Rack Mounting Standard 19 Inch. DIN Rack
Height 90 mm.
Depth 45 mm.
Width 485 mm. (with mounting brackets)
Weight 1.4 kg.

Product Part Number: VCL-1240-MON-120-100-RJ45F-16

Product Description: 16xE1/T1, 120/100 Ohms RJ45 (F) High Impedance (Hi-Z) Monitoring Patch Panel 19" Shelf 2U High Mount version with Hardware Set [RJ45 cables not included]

DIP Switch settings



All four DIP switches must be set to OFF position for non-intrusive monitoring applications.


Typical Application Diagram



16 x E1 Monitoring Patch Panel - Circuit Schematic


The Hi-Z (432 Ohm) resistive output is provided on the Monitoring (MON) Port of the Patch Panel for connecting to the Groomer / Probe / Analyser.

Connecting E1 Main Link



The RJ-45 Connectors Row A and Row B are used for Data IN/Data OUT from/to the Site A and Site B E1 link.


Connecting Hi-Z Output



The RJ-45 Connectors Row MON are used for Hi-Z Data OUT from the E1 link connected on Row A and Row B to E1 Groomers, Probes or Analysers.


Valiant Communications is an ISO 9001:2015, ISO 10001:2018, ISO 14001:2015, ISO 27001:2013 and ISO 45001:2018 certified equipment manufacturer.

Links

Home

About Us

Solutions

Applications

Data Sheets

Press

Project & Services

Reference Customers

Contact Us

Products

VCL IP/MPLS Routers

Teleprotection over E1, C37.94,
MPLS-TP, MPLS / IP, IEC-61850 GOOSE

IEEE C37.94 Solutions

VCL-PMU-30, Phasor Measurement Unit (PMU)

VCL-PDC, Phasor Data Concentrator (PDC)

Cyber Security Solutions

Router with Enhanced Security

Industrial Switches

Products

GPS / GNSS, Primary Reference Clocks (G.811)

GPS / GNSS NTP Time Server

PTP IEEE-1588v2 Grandmaster, PTP Slave, PTP Transparent Clock

NTP to IRIG-B, PTP to IRIG-B

GPS to IRIG-B, GPS to 1PPS Servers

Time Distribution, IRIG-B, 1PPS, RS-232 / RS-485

SDH with MPLS-TP & SONET Multiplexers

E1 PDH & Digital Cross Connect

Products

Optical Multiplexers

IP over TDM / Ethernet over TDM

TDM over IP / Ethernet / Packet / MPLS

E1 / T1, 1+1 Automatic Protection / Failover

1+1 Ethernet Failover / AB Fallback Switch

Groomer (Hi-Z Non-Intrusive Monitoring) - E1, T1 and STM-1

E1 and T1 Echo Cancellers & VQE

Serial to Ethernet and MODBUS Converters

Patch Panels, AC DC Converters, Passive Products